Sorry, you need to enable JavaScript to visit this website.

Smart Vision Development Kit Technical Specifications
PicoZed 7015T SOM
ZYNQ SOC
- - XC7Z015-1CLG485
MEMORY
- - 1 GB of DDR3 SDRAM
- - 128 Mb of QSPI Flash
- - 4 GB eMMC
COMMUNICATIONS
- - 10/100/1000 Ethernet PHY
- - USB 2.0 PHY
USER I/O
- - 148 User I/O (135 PL, 13 PS MIO)
- - PL I/O configurable as up to 65 LVDS pairs or 135 single-ended I/O
- - 4 GTP Transceivers
OTHER
- - JTAG configuration port accessible via I/O connectors
- - PS JTAG pins accessible via I/O connectors
- - 33.33 MHz oscillator
Machine Vision Carrier Card
COMMUNICATIONS
- - 10/100/1000 Ethernet x2 (PS based, and PL based)
- - USB 3.0, implemented with Cypress EZ-USB FX3
- - USB 2.0 OTG
- - USB Serial
USER I/O
- - 4 LEDs
- - 2 Push-Buttons
- - 4 Test Pins (available on 6 pin header)
VIDEO INTERFACES
- - Camera Connector
- - HDMI Output, implemented with ADI ADV7511
MACHINE VISION INTERFACES (implemented with Sensor to Image IP)
- - GigEVision (GEV)
- - USB3Vision (U3V)
- - CoaXPress (CXP) Host/Device
Aptina 1.2MP camera module
APTINA AR0134 SENSOR
- - Monochrome
- - Resolution = 1280x960 (1.2MP)
- - Frame Rate = 54 fps at full resolution
- - Pixel Size = 3.75-micron
- - Optical Format = 1/3 inch
- - Dynamic Range = 64 dB
- - Global Shutter
OPTICS
- - Standard lens mount: M12
- - 6mm lens